Dear Team,
We need to Implement / Install SAP FIORI in our SAP landscape.
We created 1 new ECC (EHP6 for ERP6.0) Sandbox system and installed the Gateway Components, UI5 Components and IW_BEP component.
Also configured the Gateway and its active.
Please let me know how should i proceed further with the App installation and try the same in any Mobile / Tab / Ipad.
Your help will be highly appreciated.
Awaiting for replies.
Thanks,
VARUN.
Hi ,
I want to implement value help Dialog with range option.
Implemented code with reference of sap demo kit.
But i am getting below error.
Please help.
Dear Experts,
I am trying to run Approve Supplier Invoice App. I think, have already set up all required configuration including workflow.
Issue is - No data is displayed in App whereas workflow is triggering and 'Parked Invoice' is available in user's SAP Inbox.
Workflow task - TS20000881 and Release group - 0001 in the vendor master record are also maintained.
Any idea what could be the missing configuration.
Regards
Santosh
I tried upgrading to 1.24.6 using SE38 > /UI5/UI5_UPLOAD_PATCH_TO_MIME, and got a blank screen with the following at the bottom left corner
Can I go from V 1.22.5 to 1.24.6 ?
There are volumes of SAP Notes which leads nowhere, any guide on this ?
Hello Experts,
Recently, I got the standard My Spend app to work on a clients landscape. It works great. They are happy with the launchpad and the App. They just need one small change.
My client is in the public sector and they track budget by storing it in a different table than the private sector would, COSP vs FMBDT. They each hold a range of total budget values. For My Spend to work for this client the OData simply needs a different SQL statement.
However this is one of the first 25 apps that were made before Service Builder. Lindsay Stanger wrote a great post about this issue here. http://scn.sap.com/community/mobile/blog/2013/11/08/were-the-fiori-apps-designed-to-be-extended-heres-what-i-think I tried using Service Builder. It didn't work.
Thanks to the link above, I understand that instead of using Service Builder, OData must be extended using a BAdi. While searching found this link Fiori apps Badi http://scn.sap.com/docs/DOC-48765 However, there are no enhancement Spots for the My Spend app listed in that post. Is there a guide to creating a Badi for OData?
There is a document that discusses BAdis and OData, “Adding custom fields to SAP Fiori apps in 3 steps. OData fields extensibility” When I tried applying those steps to se80 package P_SRA012 there wasn’t any header information and it wouldn’t let me Append Structure.
Any guidance would be appreciated,
Suess Shelton
My Fiori Launchpad displays a blank screen when running the FioriLaunchpad URL
https://******/sap/bc/ui5_ui5/ui2/ushell/shells/abap/FioriLaunchpad.html
I installed Fiori and everything appears to be configured ok. I then installed the backend components for Leave Requests (GBHCM002 and GBHCM003). I created a new catalog and group in the launchpad designer and assigned them to my role.
I activated the ICF services, and launchpad services via /iwfnd/maint_service. Services are assigned to LOCAL system alias and browser calls are successful and I see no errors when testing via the gateway client.
ZTRANSPORT
ZQUICKVIEW
ZPAGEBUILDER_SERVICE_V_0_1
ZPAGE_BUILDER_PERS
ZPAGE_BUILDER_CUST
ZPAGE_BUILDER_CONF
ZLAUNCHPAD
ZINTEROP
ZLEAVEREQUEST
The following components are installed and I have a combined frontend and backend system running on SAP ECC 6.0 Ehp7.
SAP_GWFND 740 0009 SAPK-74009INSAPGWFND
SAP_UI 740 0011 SAPK-74011INSAPUI
GBHCM002 600 0014 SAPK-60014INGBHCM002 HCM Employee Requests (Leave)
GBHCM003 600 0012 SAPK-60012INGBHCM003 HCM Manager Approvals (Time, Training,
UIX01EAP 100 0005 SAPK-10005INUIX01EAP UI for ERP Central Applications
UIX01HCM 100 0005 SAPK-10005INUIX01HCM UI for HCM Application
UIX01TRV 100 0004 SAPK-10004INUIX01TRV UI for Travel Application
I’ve checked ICM logs, ran the cache jobs and authorisations trace. I’m not seeing any errors anywhere so finding it impossible to troubleshoot 
Please help!
Thanks
Amanda
Hi All,
I've implemented the My Paystubs (Version 2) in our environment and when trying to run the application, we hit some error. I debug thru the application and found out that in the below method:
CL_HCM_MY_PAYSTUBS_DPC_EXT~PAYSLIPS_GET_ENTITYSET
when the application passing on the filter to the io_tech_request_context, the PERNR filter value is not correctly defined. E.g. the employee number '11011212' which assigned to the user ID is showing only as '1101' in the filter select-option value. Please see the screenshot in the attached file 'Picture1.PNG'.
Because of this issue, whenever we run the application we will hit the error as shown in the attached file 'Picture2.PNG' which being thrown out whenever it is trying to validate the PERNR using the select-option value that pass out from the 'Picture1.PNG'.
If I changed the value to '11011212' in the filter, then the error will not shown anymore and results will be returned accordingly.
I tried to search for SAP Notes for this but can't seem to find one that can fix this issue. Did anyone of you face the same issue for this app? Urgently need your help and advise on this to get this solved.
Thanks.
Hi experts,
We have configured my inbox fiori app(001) but while opening my inbox in launchpad we have issue.
Error description.
{"error":{"code":"SY/530","message":{"lang":"en","value":"RFC call was not successful because of communication failure 'The function call of /IWWRK/WF_TGW_QUERY_TASKS failed; a field may have been assigned to the parameter ET_TASKS whose type is not compatible with this parameter'."},"innererror":{"transactionid":"5E3FEBE5F3A4F1E8ADA1002590F0DB19","timestamp":"20160316062156.6610000","Error_Resolution":{"SAP_Transaction":"Run transaction /IWFND/ERROR_LOG on SAP NW Gateway hub system and search for entries with the timestamp above for more details","SAP_Note":"See SAP Note 1797736 for error analysis (https://service.sap.com/sap/support/notes/1797736)"},"errordetails":[{"code":"/IWBEP/CX_MGW_BOP_RFC_COMM","message":"RFC call was not successful because of communication failure 'The function call of /IWWRK/WF_TGW_QUERY_TASKS failed; a field may have been assigned to the parameter ET_TASKS whose type is not compatible with this parameter'.","propertyref":"","severity":"error","target":""},{"code":"/IWBEP/CX_MGW_TECH_EXCEPTION","message":"An exception was raised.","propertyref":"","severity":"error","target":""}]}}}
Experts,
I need your help in getting to bottom of this and finding the root cause. I am facing challenges in loading tasks in My Inbox app. My aim is to show all workitems from the SAP Inbox.
I have 10 workitems in my SAP inbox (SBWP). I can see them as part of my PO and PR approval apps, but they don't show up in My Inbox App. What am I missing?
LaunchPad -
Service Configuration -
System Aliases -
Scenario Definition -
Service Document -
TaskDefinitionCollection Set -
Scenario Collection -
But TaskCollection is Blank -
What did I do wrong? Please help!
Thanks,
Rohan
With the release of the Fiori Overview Page and a few blogs giving a quick overview of its use, I'm wondering where I can not get detailed information about creating annotation files for use in the WebIDE's OVP plugin..?
Iv'e seen the introduction blogs listed here (SAP Fiori Overview Page) but to do anything usable with OVP we need the full doco. ;-)
Hi,
I working on a Fiori Application and facing this issue.
Details are:-
I have Installed a gateway system and an ECC system. All RFC connections are successfully maintained.
Whenever i click the the app eg: MYSPEND, i found the below error on the screen:-
Service SRA012_SPEND_SRV failed. Contact your system administrator
I have also installed the SRA012 patch in the system.
Can someone explan me wha can be the solution.
Thanks
Siddhartha
Hi,
Can somebody tell us about the advantages of using SAP Fiori over SAP Smart Business(KPI Cockpit) ?
Regards,
Reena M
Hi All,
how we can debug the standard fiori application.
I want to debug MY PURCHASING Documents(mm_purdoc_list) Application.
As mentioned in one of the blog, we have to add sap-ui-debug=true to the url for debugging the application.
I have tried adding the parameter sap-ui-debug=true to the url, which we get after navigation to the that application in Fiori launchpad. but nothing happened.
I tried like below:
http://<>:<>/**flp/shells/abap/Fiorilaunchpad.html?#PurchasingDocumentItem-display&sap-ui-debug=true
Regards
Shyam.
Hello
I have a gateway in Netweaver 7.40 and I try to activate the Fiori application "Track Shipments"
I activated in SICF this /default_host/sap/bc/ui5_ui5/sap/le_ship_mon but in /n/IWFND/MAINT_SERVICE and add services, I don't find the odata service SRA019_SHIPMENT_TRACKING_SRV
In SICF, I activated in /n/IWFND/MAINT_SERVICE
/UI2/PAGE_BUILDER_CONF
/UI2/PAGE_BUILDER_PERS
/UI2/PAGE_BUILDER_CUST
/UI2/INTEROP
/UI2/TRANSPORT
/IWPGW/TASKPROCESSING
Thank you for your help
Hi,
I'm implementing My Inbox Fiori app with ECC, SRM and MDG as backends. The app is working fine and I can see the workitems of each backend. But the Open Task button is not working. I saw in this document
http://scn.sap.com/docs/DOC-70645
that I need to configure the open task button using transaction SWFVISU. I wonder if someone has any documentation on how to do it for SRM workitems.
Thank you!
Leonardo.
We have a SAP HANA(1.00.094.00.1427101515) and an ERP on it. We although installed FIORI Smart Business. Our Basis did configure SAP HANA, SAP WebDispatcher, SAP Frontend Server / SAP Backend Server (same server) and FIORI Launchpad.
But when we launch fiori via launchpad, we see that the KPI Modeler doesn't start up. We see only blank KPI Tiles (see picture belo)
Further, we did debug and figure out that that our GET is failing with 404 error...
the respective URL is as below:
we went ahead and checked our services in backend, fixed couple of OSS notes but still the issue continues...
Can any one help here?
We are in the process of enabling SAP FIORI My Inbox. The below are the components deployed on Gateway server.
I have assigned the following roles to my id and ID is linked to Catalog.
Now I expected to see the below catalog in FIORI Launchpad Designer but it is not displaying there.
| SAP_FND_BC_MANAGER_T | Manager Approval (Cross) - Content |
I have read lot of stuff about SAP FIORI My Inbox
http://scn.sap.com/docs/DOC-62602
I still cannot see this catalog in FIORI Launchpad Designer.
Please can you let me know what did I miss here , some reason the entire catalog for SAP_FND_BC_MANAGER_T , is not displaying.
Thanks
Krish
Experts,
I need your help in getting to bottom of this and finding the root cause. I am facing challenges in loading tasks in My Inbox app. My aim is to show all workitems from the SAP Inbox.
I have 10 workitems in my SAP inbox (SBWP). I can see them as part of my PO and PR approval apps, but they don't show up in My Inbox App. What am I missing?
LaunchPad -
Service Configuration -
System Aliases -
Scenario Definition -
Service Document -
TaskDefinitionCollection Set -
Scenario Collection -
But TaskCollection is Blank -
What did I do wrong? Please help!
Thanks,
Rohan
Hi all,
I'm new in Fiori, I was setting up the fiori launchpad from help portal (Setting Up the Launchpad - User Interface Add-On for SAP NetWeaver - SAP Library).
When I using Launchpad Designer to create catalog, it responses with "Cannot set property '$selected' of undefined". I'm not sure which configuration is wrong.
Is there anybody can tell me where I am wrong, or how can I check this problem?
Thank you.
I configured on abap server,
The ui5 version is 1.28.13.
sap_basis 740
Actived odata service :
/UI2/PAGE_BUILDER_CONF
/UI2/PAGE_BUILDER_CUST
/UI2/PAGE_BUILDER_PERS
/UI2/TRANSPORT
/UI2/INTEROP
Hello experts,
I'm trying to launch fiori application "my inbox" on S/4HANA on-premise 1511 FP01.
I activated oData service, UI5 component and assigned catalogues to my role (We have back-end and front-end on the same server), but I wasn't able to assign the role /IWPGW/RT_WF_USR (from fioriappslibrary) to my user, cause i doesnt' exist.
But I assigned all roles that contained any mention to WF to my user, just to be sure.
So when I tried to launch this application, I get the following error:
{"error":{"code":"SY/530","message":{"lang":"en","value":"An exception was raised."},"innererror":{"application":{"component_id":"OPU-BSC-TGW","service_namespace":"/IWPGW/","service_id":"TASKPROCESSING","service_version":"0002"},"transactionid":"6341F8E55038F19680BC0050569C4DE4","timestamp":"20160401193907.9920000","Error_Resolution":{"SAP_Transaction":"Run transaction /IWFND/ERROR_LOG on SAP Gateway hub system and search for entries with the timestamp above for more details","SAP_Note":"See SAP Note 1797736 for error analysis (https://service.sap.com/sap/support/notes/1797736)"},"errordetails":[{"code":"/IWBEP/CX_MGW_BOP_RFC_SYSTEM","message":"RFC call was not successful because of system failure 'Name or password is incorrect (repeat logon)'","propertyref":"","severity":"error","target":""},{"code":"/IWBEP/CX_MGW_TECH_EXCEPTION","message":"An exception was raised","propertyref":"","severity":"error","target":""}]}}}
In front-end error log I get the same confusing "An exeption was raised" with no explanation what's wrong...
And I have no idea what to do next and how to solve tat issue.
Did anyone faced the same problem? Please advise.
Thanks in advance,
Marina.